The Chain Mail Gallery

This page is a gallery of photos submitted of chain mail jewellery made by customers.
Hopefully this page will motivate and inspire your creative side.

click on the picture for a larger image.

ALL photos on this page are copyright. Use of these photos without written permission is strictly forbidden

PAGE 3 More pages. . . . 1 2 4

December Pendant

by Sara Reading (Corvus Chainmaille)
Made using stainless steel jump rings, id 3.2mm, 0.81mm.

Sara makes bespoke jewellery and armour and also teaches chain maille jewellery making. You can contact Sara at

Scale Flowers

by Sara Reading (Corvus Chainmaille)

Sara makes bespoke jewellery and armour and also teaches chain maille jewellery making. You can contact Sara at

Stainless Steel Flower

by Sara Reading (Corvus Chainmaille)

Flower made using small stainless steel scales and stainless steel jump rings, id 4.2mm, 0.81mm and some large galvanised steel rings made by Sara, id 10mm, 1.6mm wire.

Sara makes bespoke jewellery and armour and also teaches chain maille jewellery making. You can contact Sara at

Inverted Round Maille bracelet

by Marie Hattersley (Kolakube Jewellery)

Made using anodised aluminium jump rings, id 5mm, 1.29mm.

You can contact Marie at

Inverted Round Maille bracelet

by Marie Hattersley (Kolakube Jewellery)

Made using anodised aluminium jump rings, id 5mm, 1.29mm.

You can contact Marie at

Stretchy Byzantine-like bracelets

by Sara Reading (Corvus Chainmaille)

Byzantine-like weave made using EPDM o-rings, id 7.9mm, 1.63mm and anodised aluminium, id 5mm, 1.29mm.

Sara makes bespoke jewellery and armour and also teaches chain maille jewellery making. You can contact Sara at

Spirally Goodness bracelet

by Sara Reading (Corvus Chainmaille)

Spirally Goodness weave is a new weave by cjwj and was made using bright aluminium jump rings, id 6mm, 1.29mm and anodised aluminium, id 6.7mm, 1.29mm.

Sara makes bespoke jewellery and armour and also teaches chain maille jewellery making. You can contact Sara at

Nova pendants

by Sara Reading (Corvus Chainmaille)

Made using EPDM o-rings, id 7.9mm, 1.63mm and anodised aluminium, id 5mm, 1.29mm. The centre rings are bright aluminium, id 10.3mm, 1.63mm.

Sara makes bespoke jewellery and armour and also teaches chain maille jewellery making. You can contact Sara at

Byzantine bracelet with glass rings

by Marie Hattersley (Kolakube Jewellery)

Made using anodised and bright aluminium jump rings, id 5mm, 1.29mm and 9mm Czech glass rings.

You can contact Marie at

European 4-1 bracelet

by Marie Hattersley (Kolakube Jewellery)

Made using anodised and bright aluminium jump rings, id 5mm, 1.29mm.

You can contact Marie at

Byzantine bracelet

by Marie Hattersley (Kolakube Jewellery)

Made using anodised aluminium jump rings, id 5mm, 1.29mm.

You can contact Marie at

Japanese Dragonscale necklace

by Sara Reading (Corvus Chainmaille)

Japanese Dragonscale made using stainless steel jump rings, id 3mm, 0.81mm; id 4.4mm, 0.81mm; id 5mm, 0.81mm; and id 6mm, 1.02mm.

Sara makes bespoke jewellery and armour and also teaches chain maille jewellery making. You can contact Sara at

Stainless steel bracer

by Sara Reading (Corvus Chainmaille)

Stainless steel bracer made using small stainless steel scales put together with small split rings and backed with red leather.

Sara makes bespoke jewellery and armour and also teaches chain maille jewellery making. You can contact Sara at

European 4-1 bracelet

by Sara Reading (Corvus Chainmaille)

European 4-1 made using bright aluminium jump rings id 4.2mm (1.29mm).

Sara makes bespoke jewellery and armour and also teaches chain maille jewellery making. You can contact Sara at

Rainbow spiral weave bracelet

by Marie Hattersley (Kolakube Jewellery)

Made using anodised aluminium jump rings, id 5mm, 1.29mm.

You can contact Marie at

Spiral weave bracelet

by Marie Hattersley (Kolakube Jewellery)

Made using anodised aluminium and bright aluminium jump rings, id 5mm, 1.29mm.

You can contact Marie at

Spiral weave bracelet

by Marie Hattersley (Kolakube Jewellery)

Made using anodised aluminium jump rings, id 5mm, 1.29mm.

You can contact Marie at

Scary Weave

by Sara Reading (Corvus Chainmaille)

Scary weave made using stainless steel jump rings id 6.8mm (1.29mm).

Sara makes bespoke jewellery and armour and also teaches chain maille jewellery making. You can contact Sara at

Viperscale

by Sara Reading (Corvus Chainmaille)

Viperscale made using stainless steel jump rings id 6mm (1.02mm).

Sara makes bespoke jewellery and armour and also teaches chain maille jewellery making. You can contact Sara at

Japanese weave earrings

by Marie Hattersley (Kolakube Jewellery)

Made using anodised aluminium jump rings, id 5mm, 1.29mm and EPDM o-rings, id 6.4mm, 1.63mm.

You can contact Marie at

Japanese weave flower bracelet

by Marie Hattersley (Kolakube Jewellery)

Japanese weave flowers made using anodised aluminium jump rings, id 5mm, 1.29mm and bright aluminium, id 3.4m, 0.81mm. Joining Byzantine made using anodised and bright aluminium, id 5mm, 1.29mm.

You can contact Marie at

Scale Flowers

by Sara Reading (Corvus Chainmaille)

Sara makes bespoke jewellery and armour and also teaches chain maille jewellery making. You can contact Sara at

Christmas Decorations

by Sara Reading (Corvus Chainmaille)

Sara makes bespoke jewellery and armour and also teaches chain maille jewellery making. You can contact Sara at

Glow in the Dark Pendants

by Sara Reading (Corvus Chainmaille)

Made using glow in the dark o-rings, id 6.4mm, 1.63mm. Click on the picture to see a larger image.

Sara makes bespoke jewellery and armour and also teaches chain maille jewellery making. You can contact Sara at

Weave Medley

by Elaine Charlson

From top to bottom

Half Persian 4-1 in anodised aluminium 4.2mm id, 0.81mm
Byzantine in anodised aluminium 4mm id, 1.29mm
Full Persian in anodised aluminium 4.2mm id, 0.81mm
Byzantine in anodised aluminium 4mm id, 1.29mm
Helm's (or Parallel) weave in anodised titanium id 7.5mm, 1.15mm and anodised aluminium 4mm id, 1.29mm
Rhinos Snorting Drano (RSN) in anodised aluminium 4mm id, 1.29mm
Ring Cascades - Beadsisters kit
Byzantine in anodised aluminium 4mm id, 1.29mm
Full Persian in anodised aluminium 4.2mm id, 0.81mm
Helm's (or Parallel) weave in anodised titanium id 7.5mm, 1.15mm and anodised aluminium 4mm id, 1.29mm
Byzantine in anodised aluminium 4mm id, 1.29mm

Anoushka Weave

by Agnes Rothney

Agnes' own weave made using anodised niobium jump rings id 4.1mm, 1.29mm and square wire sterling silver jump rings.

Agnes makes bespoke jewellery and also teaches chain maille jewellery making. You can visit Agnes' website at www.agnesdr.com

Rainbow Persian

by Sarah Austin (Beadsisters)

Full Persian made with enamelled copper id 5mm, 0.81mm.

You can contact Sarah at

3D Box Chain

by Loren Austin (Beadsisters)

Made with enamelled copper jump rings 4mm id, 0.81mm.

You can contact Loren at

Stretchy Celtic Visions

by Susie Burdett

Made using 12x3x2mm o-rings and bright aluminium id 6.7mm, 1.64mm.

Dragonscale

by Elaine Charlson

Made using anodised niobium id 4.3mm, 0.81mm in indigo, cobalt, light blue, teal and green and sterling silver id 6mm, 1.00mm.

Rose Pendant Trio

by Loren Austin (Beadsisters)

Made using anodised aluminium rings id 4mm, 1.29mm and enamelled coloured copper id 6.5mm, 1.29mm and id 5mm, 1.29mm

You can contact Loren at

Round Maille

by Elaine Charlson

Made using anodised niobium id 4.3mm, 0.81mm in indigo, cobalt, light blue, teal and green.

Barrel Weave

by Agnes Rothney

Made using anodised niobium jump rings id 4.1mm, 1.29mm and square wire sterling silver jump rings.

Agnes makes bespoke jewellery and also teaches chain maille jewellery making. You can visit Agnes' website at www.agnesdr.com

Dragonscale

by David Young

Dragonscale weave made using anodised titanium, teal id 7.5mm, 1.15mm, and violet id 4.4mm, 1.15mm.

Captured Beads

by Agnes Rothney

Made using red anodised aluminium jump rings id 5mm, 1.29mm and 4mm black Swarovski pearls.

Agnes makes bespoke jewellery and also teaches chain maille jewellery making. You can visit Agnes' website at www.agnesdr.com

Persian & Dragonback

by David Young

Use sterling silver jump rings id 4.2mm, 0.81mm for this Full Persian bracelet (bottom) and Dragonback watch strap (top). A short length of Full Persian makes a good zipper pull.

Byzantine knots

by Agnes Rothney

Made using black anodised aluminium jump rings id 5mm, 1.29mm.

Agnes makes bespoke jewellery and also teaches chain maille jewellery making. You can visit Agnes' website at www.agnesdr.com

Rainbow Byzantine 1

by Isabel Weinberg

Byzantine weave using enamelled copper id 3.2mm, 0.81mm.

Isabel makes chain maille and ceramic bead jewellery. You can contact Isabel at

Rainbow Byzantine 2

by Isabel Weinberg

Byzantine weave using enamelled copper id 3.2mm, 0.81mm.

Isabel makes chain maille and ceramic bead jewellery. You can contact Isabel at

Scale bracelets

by Sara Reading (Corvus Chainmaille)

European 4-1 made using anodised aluminium jump rings id 5mm (1.29mm) and anodised aluminium scales.

Sara makes bespoke jewellery and armour and also teaches chain maille jewellery making. You can contact Sara at

Captive Inverted Roundmaille necklace

by David Young

Captive inverted roundmaille made using anodised titanium jump rings 7.5mm id (1.29mm) and 8mm beads.

Christmas Tree decoration

by Sarah Austin (Beadsisters)

Japanese 2-8 using anodised aluminium jump rings id 5mm (1.29mm) and enamelled copper id 3.2mm (0.81mm). The 'tinsel' is a basic mobius chain in the same size enamelled copper. The Christmas tree could be used as a decoration, pendant or festive earrings.

You can contact Sarah at

Dragon Keychain

by Sara Reading (Corvus Chainmaille)

Dragon Keychain made using Persian dragonscale, European 4-1 and Byzantine weaves with bright aluminium jump rings id 5.1mm (1.29mm) and bronze jump rings id 5mm, 3mm and 2.5mm (all 1.00mm). Also, stainless steel scales and large split ring.

Sara makes bespoke jewellery and armour and also teaches chain maille jewellery making. You can contact Sara at

Viper Scale

by Sara Reading (Corvus Chainmaille)

Viper scale made with saw cut stainless steel jump rings id 5mm (0.81mm)

Sara makes bespoke jewellery and armour and also teaches chain maille jewellery making. You can contact Sara at

Coloured Byzantine

by Sara Reading (Corvus Chainmaille)

Byzantine weave made with bright and anodised aluminium jump rings id 4mm (1.29mm)

Sara makes bespoke jewellery and armour and also teaches chain maille jewellery making. You can contact Sara at

Japanese 6-1

by Vikki Herrett

Anodised aluminium 6.8mm id (1.64mm). Photograph by Rafael Boyd

English Rose Pendant

by Sarah Austin (Beadsisters)

From Beads and Beyond (July 2009).
For those who would like to try this project, I used anodised niobium id 4.1mm (1.29mm) and sterling silver id 4.9mm (1.29mm) and id 6.7mm (1.29mm). You can use any metal with the code no. starting rd3-50, rd4-50 and rd6-50.

You can contact Sarah at

Chainmail Link Necklace with Drops

by Becky Hall

Becky used jump rings with an id 8mm, 6mm and 4mm (1.02mm) and magatama drops.

You can visit Becky's website at www.hoopaloop.misi.co.uk

Glass Ring Byzantine

by Sarah Austin (Beadsisters)

Anodised aluminium 4mm id (1.29mm) for the byzantine. To join to the 9mm glass rings, use 5mm id (1.29mm).

You can contact Sarah at

Byzantine lariat with oriental 5 in 1 ball end

by David Young

Byzantine rope made with bronze jump rings 4.1mm id (1.29mm), and oriental 5 in 1 ball end made with about 80 bronze jump rings 2.6mm id, 0.64mm.
The beautiful lampwork beads were purchased on a trip in Arizona, USA.

If you have a picture that you would like to submit to be concidered for inclusion on this page, please email it to us.
Remember to include any details or info that you would like to appear with the picture, such as your name, what it is, how it was made, etc., etc.
Please ensure that you have copyright for the photograph.