The Chain Mail Gallery

This page is a gallery of photos submitted of chain mail jewellery made by customers.
Hopefully this page will motivate and inspire your creative side.

click on the picture for a larger image.

ALL photos on this page are copyright. Use of these photos without written permission is strictly forbidden

PAGE 2      More pages. . . . 1   3   4   5

click for a bigger picture
Handbag Bling

by Wendy Manz

Add a short chain of beads to your handbag strap such as these acrylic pepper daggers and acrylic tropicals beads.

You can contact Wendy at


click for a bigger picture
Full Persian Choker

by Wendy Manz

Made using anodised aluminium, id 8.3mm, 1.64mm, silver chain and acrylic pepper daggers.

You can contact Wendy at

click for a bigger picture
Beez to Butterflies Cuff

by Mandy Norton

This weave is also known as Enigma Chain (in Chains by Becky) and Gridlock Byzantine. Made using bright and anodised aluminium rings, id 5mm, 1.29mm.

You can contact Mandy at

click for a bigger picture
Japanese Weave Necklace

by Gwendoline Lupson

Made using copper rings, id 4.7mm, 1.02mm and jewellers brass, id 2.9mm, 1.02mm and 3.7mm, 1.02mm. Click on the picture for a close up of the flower focals.


click for a bigger picture
Helm Flower Necklace

by Joy Allton

Made using bright aluminium, id 4.2mm, 5mm, and 8.6mm, 1.29mm.

You can contact Joy at

click for a bigger picture
Byzantine bracelet

by Joy Allton

Made using bright aluminium, id 4.2mm, 5mm and 8.6mm, 1.29mm.

You can contact Joy at

click for a bigger picture
Dangly Earrings

by Joy Allton

Made using bright aluminium, id 4.2mm, 5mm, and 8.6mm, 1.29mm.

You can contact Joy at

click for a bigger picture
Adapted Butterfly

by Veronica Tinkler

Made with id 4mm, 1.02mm coloured copper and id 4.8mm and 6mm, 1.02mm bright aluminium rings. This design is available as a tutorial on Veronica's website.

Veronica is a jewellery designer and tutor in Kent. You can contact Veronica through her website http://udelovichdesigns.vpweb.co.uk

click for a bigger picture
European 4-1 Diamonds

by Gwendoline Lupson

Made using non-tarnish silver enamelled copper, id 4mm, 1.02mm.


click for a bigger picture
Heleena

by Veronica Tinkler

Made using id 6.5mm, 1.02mm bright aluminium and id 3.2mm and id 4mm, 0.81mm coloured copper.

Veronica is a jewellery designer and tutor in Kent. You can contact Veronica through her website http://udelovichdesigns.vpweb.co.uk

click for a bigger picture
Flower Tube Bracelet

by Kathryn Rintoul

Made using anodised aluminium, id 5mm and id 6.7mm, 1.29mm.

Kathryn makes and teaches chain maille jewellery in the Aberdeen area. You can contact Kathryn at
You can see more of Kathryn's work on http://facebook.com/krintoul.jewellery

click for a bigger picture
Chain Maille Bag

by Paddy Comer

European 4-1 and box chain using anodised aluminium, id 8.3mm, 1.64mm.

Paddy makes chain maille bags. You can contact Paddy at

click for a bigger picture
Crocodile Back Cuff

by Kathryn Rintoul

Made using bright aluminium, id 4.2mm and id 6.9mm, 1.29mm.

Kathryn makes and teaches chain maille jewellery in the Aberdeen area. You can contact Kathryn at
You can see more of Kathryn's work on http://facebook.com/krintoul.jewellery

click for a bigger picture
European 4-1 Diamonds

by Gwendoline Lupson

Made using yellow gold fill, id 4.2mm, 1.02mm.


click for a bigger picture
Captured Rings Necklace

by Tony Ackroyd

Made using anodised aluminium, id 5mm, 1.29mm and stainless steel, id 5mm and 6mm, 1.00mm.

Tony of A J Jewellery makes chain maille jewellery. You can contact Tony at

click for a bigger picture
Double Helm Cuff

by Kathryn Rintoul

Made using anodised aluminium, id 4.2mm, 1.29mm and bright aluminium, id 6.9mm 1.29mm.

Kathryn makes and teaches chain maille jewellery in the Aberdeen area. You can contact Kathryn at
You can see more of Kathryn's work on http://facebook.com/krintoul.jewellery

click for a bigger picture
King Scale Ring

by Tony Ackroyd

Kings Scale made using anodised aluminium, id 6.7mm, 1.29mm and stainless steel, id 4mm, 1.00mm.

Tony of A J Jewellery makes chain maille jewellery. You can contact Tony at

click for a bigger picture
Dodey Balls

by Veronica Tinkler

The dodecahedron balls are made using a variety of rings.The coloured balls are made using coloured copper rings, id 4mm, 0.81mm; whilst the silver coloured balls are made using bright aluminium, id 6mm, 1.02mm and non-tarnish silver coloured copper, id 5mm, 0.81mm.

Veronica is a jewellery designer and tutor in Kent. You can contact Veronica through her website http://udelovichdesigns.vpweb.co.uk

click for a bigger picture
Box Chain & European 4 in 1

by Kerry Johnston

The top necklace in graduated box chain is made using coloured copper rings, id 2.4mm, 0.81mm, id 3.2mm, 0.81mm, id 4mm, 0.81mm and id 5mm, 0.81mm, and stainless steel id 5.2mm, 1.29mm.
For the bracelet, blocks of European 4-1 in stainless steel id 5.2mm, 1.29mm are joined in the same weave with anodised aluminium id 6.7mm, 1.29mm and finished with aluminium scales.


click for a bigger picture
Linked Byzantine

by Isabel Weinberg

Byzantine weave using non-tarnish silver enamelled copper id 3.2mm, 0.81mm and linked with copper, id 3.3mm, 0.81mm. Click on the picture to see a larger version.

Isabel makes chain maille and ceramic bead jewellery. You can contact Isabel at

click for a bigger picture
Helms Weave

by Mark Laird

Made using bright aluminium, id 10.3mm, 1.63mm and anodised aluminium, id 6.8mm, 1.64mm.

Mark makes and teaches chain maille jewellery in Surrey. You can contact Mark at

click for a bigger picture
Celtic cuff

by Isabel Weinberg

Made using non-tarnish silver enamelled copper id 3.2mm, 0.81mm and linked with copper, id 3.3mm, 0.81mm. Click on the picture to see a larger version.

Isabel makes chain maille and ceramic bead jewellery. You can contact Isabel at

click for a bigger picture
Knotted Byzantine

by Isabel Weinberg

Byzantine weave with mobius knots using enamelled copper id 3.2mm, 0.81mm. Click on the picture to see a larger version.

Isabel makes chain maille and ceramic bead jewellery. You can contact Isabel at

click for a bigger picture
Turquoise and Copper Necklace

by Mark Laird

Byzantine weave using copper, id 4.1mm, 1.29mm. The beads are threaded onto 1.25mm copper wire.

Mark makes and teaches chain maille jewellery in Surrey. You can contact Mark at

click for a bigger picture
The Blues Byzantine Earrings

by Isabel Weinberg

Byzantine weave using enamelled copper id 3.2mm, 0.81mm and finished with 9mm glass rings and niobium earwires.

Isabel makes chain maille and ceramic bead jewellery. You can contact Isabel at

click for a bigger picture
Rainbow Byzantine Earrings

by Isabel Weinberg

Byzantine weave using enamelled copper id 3.2mm, 0.81mm.

Isabel makes chain maille and ceramic bead jewellery. You can contact Isabel at

click for a bigger picture
In the Pink Byzantine Earrings

by Isabel Weinberg

Byzantine weave using enamelled copper id 3.2mm, 0.81mm and finished with niobium earwires.

Isabel makes chain maille and ceramic bead jewellery. You can contact Isabel at

click for a bigger picture
Half Persian Trim

by Sarah Austin (Beadsisters)

Made from id 5mm, 1.29mm anodised aluminium. This is a strip of European 4-1 with a trim in half Persian 3-1.

You can contact Sarah at

click for a bigger picture
Half Persian 4 in 1

by Pam Bee

Made using alternate blue and green anodised aluminium rings, id 6.7mm, 1.29mm, and bright aluminium rings, id 6.9mm, 1.29mm.


click for a bigger picture
Cluster Necklace

by Veronica Tinkler

Made using stainless steel and non-tarnished silver coloured copper jump rings with Czech glass peacock beads.

Veronica is a tutor and jewellery designer. You can contact Veronica through her website http://udelovichdesigns.vpweb.co.uk

click for a bigger picture
European 6 in 1

by Pam Bee

Made using anodised aluminium rings, id 6.7mm, 1.29mm and finished with a black finish Tierracast toggle.


click for a bigger picture
Crystal Celtic Squares

by Anna Boyle

This is a variation on the Celtic Squares cuff with 4mm and 6mm Swarovski crystals threaded along the length of the cuff (made with bronze jump rings).


click for a bigger picture
Coloured Celtic Squares

by Anna Boyle

Anna has used coloured enamelled copper jump rings, id 4mm, 0.81mm to add some colour to the bronze Celtic Squares cuff.


click for a bigger picture
Helm's Weave Watch Strap

by Mandy Bishop

Made using id 6.6mm, 1.02mm and id 4mm, 0.81mm in enamelled coloured copper.

Mandy makes chain maille jewellery. You can contact Mandy at

click for a bigger picture
Byzantine Cufft

by Mandy Bishop

Made using id 4mm, 1.02mm in enamelled coloured copper.

Mandy makes chain maille jewellery. You can contact Mandy at

click for a bigger picture
Turkish Maille Bracelet

by Mandy Bishop

Made using id 3.2mm, 0.81mm in enamelled coloured copper.

Mandy makes chain maille jewellery. You can contact Mandy at

click for a bigger picture
Half Persian 4-1 Wrapped Cameos

by Sara Reading (Corvus Chainmaille)

Made using id 4.2mm, 0.81mm anodised aluminium.

Sara makes bespoke jewellery and armour and also teaches chain maille jewellery making. You can contact Sara at

click for a bigger picture
Helm Flower Ball

by Sarah Friend

Sarah connected individual helm's flowers in threes and stuffed the ball with old (clean!) socks. Made using orange glow-in-the-dark o-rings (id 7.9mm, 1.63mm) connected with anodised aluminium (id 5mm, 1.29mm).


click for a bigger picture
Dragonscale Bracelet

by Veronica Tinkler

Made using copper, id 6.7mm, 1.02mm and anodised titanium, id 4.4mm, 0.81mm.

Veronica is a tutor and jewellery designer. You can contact Veronica through her website http://udelovichdesigns.vpweb.co.uk

click for a bigger picture
Dragon Inlay

by Sarah Friend

European 4-1 made using anodised aluminium and bright aluminium, id 5mm, 1.29mm and edged with id 8.3mm, 1.64mm. Chain made using stainless steel jump rings.


click for a bigger picture
Cedric

by Raven Wing Design

This dragon sculpture was made with a variety of weaves - captive inverted round, half Persian 3-1, box chain and Byzantine. Made using bright aluminium, id 4mm, 1.29mm; id 5mm, 1.29mm; and id 10.3mm, 1.63mm and blue and green anodised aluminium scales.

You can see other designs by Raven Wing Designs on http://www.facebook.com/RavenWingDesign

click for a bigger picture
Byzantine Triads Necklace

by Sarah Friend

Made using stainless steel in multiple sizes - largest ring - id 6.8mm, 1.29mm joined with id 3mm, 0.81mm. The triads were made with id 4.2mm, 1.02mm and id 5.2mm, 1.29mm centres.


click for a bigger picture
Byzantine Triple Strand Necklace

by Sarah Friend

Made using stainless steel id 3mm, 0.81mm.


click for a bigger picture
Japanese 12-2 Collar

by Sarah Friend

Made using stainless steel id 5.2mm, 1.29mm and id 3.6mm, 0.81mm with teal anodised titanium id 7.5mm, 1.15m.


click for a bigger picture
Dragonfly Pendant

by Georgie Devaney

Made using Byzantine weave in anodised aluminium, id 4mm, 1.29mm and decorated with 4mm and 8mm crackle quartz from Georgie's own stash.

You can contact Georgie at

click for a bigger picture
Bold Byzantine

by Kathryn Rintoul

Made using anodised aluminium, id 4mm, 1.29mm and id 6.7mm, 1.29mm with 9mm Czech glass rings.


click for a bigger picture
Vipera Berus

by Alison Tanner

Made using bright aluminium, id 4.2mm, 1.29mm (weave by Loke).


click for a bigger picture
Byzantine Variation

by Georgie Devaney

Made using bright aluminium, id 4.2mm, 1.29mm and a stainless steel clasp.

You can contact Georgie at

If you have a picture that you would like to submit to be concidered for inclusion on this page, please email it to us.
Remember to include any details or info that you would like to appear with the picture, such as your name, what it is, how it was made, etc., etc.
Please ensure that you have copyright for the photograph.

PAGE 2      More pages. . . . 1   3   4   5